Beyond the Size

Safely Transporting a Refrigerator in Your SUV: Tips and Tricks

Transporting a Refrigerator in an SUV

Are you moving or simply transporting a refrigerator in your SUV? Before doing so, its important to know how to do it safely to avoid any damages.

This article will provide you with valuable information about the best way to transport a refrigerator in your SUV, as well as the importance of keeping it in an upright position.

Recommended Upright Transport

The most important thing to consider when transporting a refrigerator is the position it is in. It is recommended to transport a refrigerator in the upright position.

When a refrigerator is moved in any other position, the compressor can get damaged. The compressor is the part of the refrigerator that circulates the refrigerant and helps remove heat from the interior.

If this part gets damaged, it can be very costly to repair or replace.

Moreover, when a refrigerator is tilted, it is possible that the oil will leak into the refrigerant lines, which could lead to a blocked capillary tube and eventually cause major damage.

To avoid any mishaps, secure the refrigerator well to prevent it from shifting during the move.

Suitability of SUVs for Transporting Refrigerators

SUVs are great for transporting large items, and refrigerators are no exception. Most SUVs come with folding rear seats, and this feature makes SUVs more versatile when it comes to transporting things.

You may also find that an SUV’s back door can be opened more widely than that of a car, making it easier to load and unload larger items. Keep in mind that some refrigerators may not fit perfectly in your SUV, so be sure to measure your SUV’s height, width, and depth before attempting to transport a refrigerator.

It’s always best to know the exact dimensions of the refrigerator and compare them to the space available in the SUV before attempting to move it.

Refrigerator Dimensions and Measuring Methods

Refrigerators are available in numerous shapes and sizes. They can be top-freezer, bottom-freezer, French-door, or side-by-side models.

Often, determining the right size refrigerator for your needs depends on the size of the space where it will be placed. Here are common refrigerator measurements that you should consider when shopping for a new one:

Height: Typically, refrigerators come in heights ranging from 57 inches to 69 inches.

If you have a kitchen with cabinets above the refrigerator, make sure you measure the height from the floor to the bottom of the cabinet to make sure you don’t end up with a fridge that’s too tall. Width: Most refrigerators are designed to fit perfectly between standard base cabinets, which measure 24 inches deep.

The width measurements range from 28 inches to 36 inches. Depth: Generally, refrigerators are deep enough to accommodate most food items and also fit into standard kitchens.

The depth of most refrigerators ranges from 28 to 34 inches.

Measuring Methods for a Refrigerator

When measuring a refrigerator, it is crucial to use the correct method to get an accurate measurement. To measure your refrigerator, follow these simple steps:

1.

Use a measuring tape to measure from the floor to the top of the refrigerator to determine the fridge’s height. 2.

To measure the refrigerator’s width, measure the space between the two cabinets where the fridge will be installed

3. If you’re shopping for a bottom-freezer refrigerator, measure from the floor to the top of the door.

4. For top-freezer refrigerators, measure from the floor to the base of the freezer compartment.

To make the measuring process easier, make sure you remove any handles that are attached to the refrigerator. Handles generally add a couple of inches to the refrigerator’s width, so it’s essential to measure without them.

In Conclusion

Transporting a refrigerator may seem like a daunting task, but with proper preparation, you can transport it without any damages. Transporting a refrigerator in an SUV requires that it remains in an upright position to prevent compressor damage.

SUVs are excellent for transporting large items and their folding rear seats make them more versatile when loading and unloading. Before transporting a refrigerator, measure the SUV’s dimensions, and use a measuring tape to measure the refrigerator by following the mentioned steps.

Always be sure to measure your space before purchasing a new fridge. Now that you have learned more about transporting your refrigerator, you’ll be ready to safely move it with confidence.

Checking SUV Dimensions for Refrigerator Fit

When it comes to transporting large items like refrigerators, it’s essential to ensure that they will fit in the vehicle you plan to transport them in. It can be disappointing to find out that a refrigerator does not fit in your vehicle after you have already purchased it.

This article will provide some tips on how to check SUV dimensions for refrigerator fit.

Understanding Cubic Feet as a Measurement of Space

The first step to checking if your SUV is suitable for transporting a refrigerator is understanding cubic feet as a measurement of space. Cubic feet refers to a measurement of volume, which is used to describe the amount of space an object occupies.

When it comes to SUVs, it’s essential to consider the cargo space available. Cargo space refers to the space available in an SUV to store items.

You can use the cargo volume measurement of your SUV to determine if it can fit the refrigerator you want to transport.

Comparing SUV Measurements to Refrigerator Dimensions

Once you know the cubic feet available in your SUV, you need to compare it to the dimensions of the refrigerator to determine if it can fit. Here are the dimensions you need to consider:

Width: Measure the width of the refrigerator at its widest point.

Common widths for refrigerators are between 30 and 36 inches. Height: Measure the height of the refrigerator from the ground up to the highest point.

Most refrigerators range from 57 to 69 inches tall. Depth: Measure the depth of the refrigerator from the front to the back.

Common depths are between 30 to 34 inches. Once you have these dimensions, you can compare them to the cargo space of your SUV.

One thing to remember when comparing the dimensions is that you should leave a few inches of space between the refrigerator and any walls or cabinetry inside the SUV to prevent damage while transporting it.

Tips for Moving a Refrigerator in an SUV

Moving a refrigerator can be a daunting task, especially if the refrigerator is heavy. Here are some tips on how to move a refrigerator in an SUV to prevent damage to the appliance and your vehicle:

Essential Precautions for Moving a Heavy Refrigerator

First and foremost, safety should always be a priority when moving a heavy refrigerator. Be sure to wear protective gear like gloves and closed-toe shoes to prevent any injuries.

You should also make sure you have enough people to help you move it. A refrigerator can weigh between 200 to 400 pounds, so it will require more than one person to move it.

In addition to safety precautions, be sure to protect your SUV from scratches and scuffs. Place a protective covering or blankets on the floor and walls of your SUV to protect it from any potential damages.

Before moving the refrigerator, be sure to read the manual to know how to move it safely. Most manuals will have instructions on how to move the refrigerator and how to store it safely.

Securing the Refrigerator in the SUV and Letting It Settle

When the refrigerator is inside your SUV, you’ll want to secure it in place with straps to prevent it from shifting during transportation. The straps should be snug enough to keep the refrigerator in place, but not so tight that they cause any damages.

Once the refrigerator is secured, let it settle for a few minutes before moving it. During transport, the oil and coolant inside the appliance can shift, and this can lead to potential damages.

By letting it settle, these fluids can settle harmlessly back into place, and you’ll be able to move the refrigerator without damaging the motor or other essential parts.

In Conclusion

Moving a refrigerator can seem like a daunting task, but by taking the proper precautions, it can be done successfully. Checking the dimensions of your SUV and the refrigerator you want to relocate will help you determine if the appliance can be transported safely.

Always read the manual instructions carefully and wear protective gear. Be sure to secure the refrigerator with straps and let it settle before moving it to avoid any damages.

By following these tips, you’ll be able to move your refrigerator safely and with ease. In conclusion, transporting a refrigerator in an SUV requires that it remains in the upright position to prevent compressor damage.

SUVs provide enough space for transporting a refrigerator, but it’s crucial to know how to measure the SUV dimensions correctly to fit the appliance. Moving a heavy refrigerator safely requires taking essential precautions like wearing protective gear, following the manual instructions, securing it well inside the SUV, and allowing it to settle for a few minutes before moving it.

By following these guidelines, you can successfully move your refrigerator without damaging it or your SUV.

FAQs:

Q: Can I transport a refrigerator on its side or back?

A: It’s not recommended to transport a refrigerator on its side or back as this can lead to compressor damage and blockages caused by oil leaks. Q: Can I move a refrigerator alone?

A: Considering that refrigerators can weigh between 200 to 400 pounds, it’s essential to have extra help when moving a refrigerator to avoid any injuries and potential damages to the appliance or SUV. Q: Why is it important to let the refrigerator settle before moving it?

A: When transporting a refrigerator, the fluids inside it tend to shift, and if the compressor is running during transportation, it can lead to oil leaks or blockages. Allowing it to settle for a few minutes before moving it allows the fluids to settle harmlessly back in place.

Q: Can I measure the refrigerator’s dimensions without removing the handles? A: No, handles generally add a few inches to the refrigerator’s width, so it’s essential to remove them when measuring the appliance’s dimensions to ensure the correct measurements.

Popular Posts