Beyond the Size

Surf Smart: How to Transport Your Surfboard by Car

Surfing is a thrilling and exciting water sport that requires a lot of physical endurance and skill. While surfing itself may be a fun and exhilarating activity, transporting your surfboard can be a challenge.

Getting your surfboard to the beach can be a daunting task, especially if you don’t have a roof rack on your car, or if your board is larger than your car. In this article, we will provide you with a guide on how to transport your surfboard by car, including how to measure your surfboard, the weight of surfboards, and whether they can fit into a car or not.

How to Measure a Surfboard

Before you figure out how to transport your surfboard, you need to know how to measure it. Surfboards come in different sizes and shapes, and understanding these measurements is critical in determining the right mode of transportation.

The three key measurements to consider when measuring a surfboard are length, width, and thickness. Length: The length of a surfboard is the distance from the nose to the tail.

To measure the length of your surfboard, lay it on a flat surface, and measure from the tip of the nose to the tip of the tail. Width: The width of a surfboard is the distance from one rail to the other.

To measure the width of your surfboard, place it flat on the ground and measure across the widest point. Rocker: The rocker is the curve of the surfboard from the nose to the tail.

It is essential to know the rocker of your board, especially if you are transporting it by car. If your board has a pronounced rocker, it may be more challenging to transport.

Thickness: The thickness of a surfboard is the distance from the top to the bottom of the board. To measure the thickness of your surfboard, place it on a flat surface and measure how thick it is in the middle.

How Much Do Average Surfboards Weigh? The weight of your surfboard is another critical factor when considering how to transport it.

Generally, surfboards weigh around 20 pounds, but the weight can vary depending on the size, type, and materials used to make the board. Board Dimensions vs.

Your Car’s Cargo Space

The next important step is to figure out whether your surfboard can fit into your car. While it would be great to have a truck or large SUV to transport your surfboard, most people don’t have that luxury.

Instead, you will need to measure your car’s trunk space to determine whether your surfboard can fit. To measure your car’s cargo space, you’ll need to measure the length, width, and height of the trunk space.

These measurements will help determine your car’s cubic feet. If you are unsure of your car’s cubic feet, refer to the car owner’s manual or check online.

Car Trunk Measurement Examples

Let’s look at a few popular car models and their trunk sizes. Keep in mind that these measurements may vary slightly depending on the year and model of your car.

1. Honda Civic: The Honda Civic has around 15 cubic feet of trunk space.

This is enough to fit a small-to-medium-sized surfboard. 2.

Toyota Camry: The Toyota Camry has a larger trunk space of around 15.1-15.4 cubic feet. This is sufficient to fit a medium-sized surfboard.

3. Subaru Outback: The Subaru Outback is a larger car with more cargo space.

It has around 32.5-73.3 cubic feet of space, making it ideal if you need to transport several surfboards.

Comparison of Hatchback and Traditional Trunks

When it comes to transporting your surfboard, you may be wondering which is better a hatchback or traditional trunk. Hatchbacks are generally more versatile due to their larger trunk openings and seats that can fold down to make more space.

In contrast, traditional trunks are usually smaller and have limited space. Hatchbacks have more headroom, so you can transport taller surfboards with ease.

However, it’s essential to ensure that the board doesn’t jut out too far, as this can be dangerous when driving. In conclusion, if you want to transport your surfboard by car, you need to start by measuring your board, knowing the weight, and then measuring your car’s cargo space to determine whether it can fit.

Make sure to select the right car model or upgrade to a larger car if you plan to transport more than one surfboard. By following these simple tips, you’ll soon be on your way to the beach with your surfboard.

3) Considerations for Transporting a Surfboard

Transporting a surfboard by car can be a challenging task, especially if you do not take the necessary measures to protect the board. Surfboards are expensive investments, and they require proper care and maintenance to ensure they last for a long time.

In this section, we will explore ways to protect your surfboard during transport and the safety and legal concerns associated with this activity.

Protecting Your Surfboard During Transport

One of the best ways to protect your surfboard during transport is by using a surfboard bag. Surfboard bags come in different shapes and sizes, ranging from day-use bags to travel bags.

They can be made of different materials such as polyester, nylon, and canvas. A surfboard bag will cushion the board during transport, protect it from weather elements, and prevent dings and scratches.

When using a surfboard bag, ensure that it fits your board correctly. An oversized bag will allow the board to move around, which can cause damage.

On the other hand, an undersized bag may not offer enough protection, and the board’s tail or nose may stick out, making it prone to dings and scratches. Another way to protect your surfboard is by using a surfboard rack.

A surfboard rack is a piece of equipment that attaches to your car’s roof rack or trailer hitch. It is specifically designed to transport surfboards safely and securely.

When installing a surfboard rack, ensure that it is installed correctly and tightly to prevent it from coming off during transportation.

Safety and Legal Concerns When Transporting a Surfboard

Transporting a surfboard can pose some safety and legal concerns. Firstly, you must ensure your surfboard is securely attached to your car and will not fly off whilst you’re driving.

It is crucial to double-check your rack installation and use straps to secure the board to the rack. When fitting a board into your car, be careful not to impede visibility or driving ability.

There are also legal regulations regarding transporting surfboards. In some states, it is illegal to have surfboards that stick out from the vehicle.

Make sure to check your location’s laws regarding surfboard transportation before you hit the road.

4) Tips and Tricks for Transporting a Surfboard

Packing and loading your surfboard correctly are essential to ensure it arrives at the beach in perfect condition. Here are some tips and tricks to consider when packing and loading your surfboard.

Useful Tips for Packing and Loading

1. Clean it up: Before transporting your surfboard, make sure it is clean and dry.

Sand and salt can cause damage and discoloration to your board if not cleaned off. 2.

Protect the nose and tail: Use foam packing or pipe insulation to cushion the nose and tail of your board during transport. The nose and tail are susceptible to dings and scratches, so extra padding can prevent unnecessary damage.

3. Secure the board: When securing the board, make sure it won’t slide around and hit other items or walls of the car.

You can use straps or bungee cords to secure it in place. Be sure not to tighten them too much, as this can lead to pressure dings.

4. Use surfboard accessories: Surfboard accessories such as pads, fins, and leashes should be removed when transporting a board.

These items can shift and damage the board during transport. Instead, pack them in a separate bag.

Alternative Ways of Transporting a Surfboard

Transporting a surfboard by car is not the only option. If you do not own a car, you can consider alternative modes of transportation such as bikes, public transport, or surfboard trailers.

Bike Racks: If you are a cyclist, bike racks can allow you to transport your surfboard on a bike. There are two types: front racks that hold the board vertically or side racks that hold it horizontally.

Public Transportation: Some cities offer public transportation options that allow you to transport your surfboard. Research ahead of time to know where, when, how, and if it’s possible.

Surfboard Trailers: If you own several boards or frequently transport surfboards, investing in a surfboard trailer may be the best solution. These trailers are lightweight, easy to tow and come in different sizes.

In conclusion, transporting a surfboard by car can be a challenge, but taking the necessary measures to protect your board and ensuring you follow safety regulations can make the process much smoother. Using a surfboard bag or rack, packing the board correctly, and securing it in place are essential tips to remember when transporting your board.

Alternatively, if you do not own a car, consider using alternative modes of transportation such as bikes, public transit, or surfboard trailers. With the right equipment, precautions, and know-how, you can transport your surfboard safely and securely to your next surfing destination.

5) Conclusion

Transporting a surfboard can be a daunting task, especially if you don’t have a car equipped with a roof rack or if your board is significantly larger than your vehicle. However, with the right preparation, your surfboard can be transported safely and securely to your desired destination.

In this section, we will summarize the overall considerations for surfboard transportation and offer additional tips for ensuring your surfboard arrives at the beach in excellent condition.

Overall Considerations for Surfboard Transportation

Before you transport your surfboard, there are a few things you should consider. First, ensure that your car can adequately accommodate your board.

Measure your car’s cargo space, trunk length, width, and height, and compare it with your surfboard measurements. Utilize surfboard bags or racks to protect your board during transportation.

Additionally, ensure that your board is secured and packed correctly. Use foam padding or pipe insulation to protect the nose and tail of your board, and secure it in place with straps or bungee cords.

Double-check your work before getting on the road to ensure that the board will not shift or come loose during transport.

Safety and Protection

Ensure that your board is well protected during transport. Use protective gear such as surfboard bags, foam padding, or pipe insulation to prevent dents, scratches, or damage.

Place the surfboard in the car as safely and securely as possible, avoiding blocking passengers’ vision or interfering with the driver’s ability to operate the vehicle. When transporting your surfboard by car, don’t forget to check and follow your state’s specific safety and legal guidelines.

You don’t want to risk breaking the law or put yourself or others at risk. Finally, give your surfboard ample space to minimize the risk of damage.

Additional Tips

Here are a few additional tips for transporting your surfboard:

1. Use surfboard-specific racks: Surfboard-specific racks are designed to protect the board while in transit.

Such racks have padding that offers a secure and snug fit for your board. 2.

Avoid the sun’s heat: Never leave your surfboard in the direct sun, as this can cause the wax to soften and eventually weaken the board’s structure. 3.

Load the board nose first: When loading your board, load it tail up, nose first. This prevents the board’s tail from being subjected to the force of wind while in transit.

4. Harnessing: For safety reasons, harness the board down.

This way, the board won’t move or fly off when the vehicle is in motion. In conclusion, transporting a surfboard by car can be a complex task, but it becomes easier with proper preparation and precautions.

Before setting off with your surfboard, ensure that it is safely secured and protected. Use protective gear such as foam padding or pipe insulation and avoid leaving your board in the direct sun.

Understanding how to transport your surfboard safely, following safety regulations, and taking necessary precautions can ensure your beloved board arrives at your destination safely and in excellent condition. In conclusion, transporting a surfboard by car requires careful preparation and attention to detail.

By taking the necessary precautions and investing in the right gear, transporting your surfboard can be done safely and efficiently. Remember to measure your surfboard, protect it during transport, follow safety guidelines, and make sure your car’s cargo space is compatible with your surfboard’s dimensions.

With these tips and tricks, you can transport your surfboard with ease and make it to the beach for a fun day surfing. FAQs:

1.

How do I measure my surfboard for transport? Measure your surfboard’s length, width, thickness, and rocker.

2. What is the weight of an average surfboard?

Surfboards weigh around 20 pounds, but the weight can vary depending on the size, type, and materials used to make the board. 3.

Can a surfboard fit in a car? It depends on the size of the surfboard and the cargo space in the car.

Measure your car’s trunk length, trunk height, trunk width, and cubic feet, and compare it to your surfboard’s dimensions. 4.

What are some ways to protect a surfboard during transport? Use a surfboard bag, a surfboard rack, and foam padding or pipe insulation to cushion the nose and tail of your board.

5. What are some safety guidelines to remember when transporting a surfboard?

Ensure that your surfboard is securely attached to your vehicle and won’t fly off while driving. Follow your state’s specific safety and legal guidelines and avoid obstructing visibility or the driver’s ability to operate the vehicle.

Popular Posts